New Vishay Dale Thin Film Wraparound Chip Resistor is released by New Yorker Electronics

NORTHVALE, New Jersey, USA – New Yorker Electronics has announced its release of the new Vishay Dale PHPA Series of Thin Film Wraparound Chip Resistors. The new Vishay Resistors incorporate the self-passivated tantalum nitride film to provide increased moisture resistance as well as improved ESD, voltage coefficient and resistance stability performance. These features allow for high thermal stability within harsh or hazardous environmental conditions.

The AEC-Q200 qualified, Vishay high-power thin film resistor series combines power ratings of 1.0W and 2.5W in the 1206 and 2512 case sizes, respectively. They significantly reduce board space and component counts by replacing larger or paralleled resistors. Vishay PHPA resistors are designed with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end user’s circuit board.

Most thin film chip resistors have a low power capability. Therefore several chips must be used to accommodate higher power applications. In hazardous or unstable environmental conditions, resistors need to be fabricated with resistive materials that can handle the elements. The Vishay thin film series is fabricated with tantalum nitride (Ta2N). This offers superior moisture resistance and high thermal stability in harsh conditions. In addition, the devices’ power capability far exceeds the industry standard.

The 1206 case size offers a resistance range of 12 to 30.1 Ω while the 2512 supplies a range of 10 to 30.1 Ω. The resistors have an ESD rating 5A (HBM) a resistor tolerance to ± 0.1% and TCR to ±25 ppm/°C. These qualities present new product design advantages such as reduced component count, increased design flexibility with higher power capability, reduced assembly costs and improved board-level reliability.

The resistor’s actual power-handling capability is limited by the end user mounting process. As with any high power chip resistor the ability to remove the generated heat is critical to the overall performance of the device.

Features & Benefits:

AEC-Q200 qualified
ESD rating 5A (HBM)
Moisture resistant
High purity ceramic substrate
Power rating to 2.5 W
Resistance range 10 Ω to 30.1 kΩ
Resistor tolerance to ± 0.1 %
TCR to ± 25 ppm/°C
Flame resistant UL 94 V-0

Power supplies
Power switching
Braking system
Test and measurement equipment
Motor deflection circuits
New Yorker Electronics supplies Vishay Dale discrete semiconductors (diodes, MOSFETs and infrared optoelectronics) and passive electronic components (resistors, inductors and capacitors).

Architects: Designs on Your Home

If you are considering expanding your existing home or a building design for a completely new home it’s a good idea to get an architect on board from the get go. Here are some key ways in which an architect can help you and your home.

Knowledge and Experience

Building or expansion work is never a straightforward process and it often involves large amounts of official paperwork and numerous key decisions with regard to your proposed property. By seeking the advice of a fully qualified and experienced architect you will be drawing upon years of professional experience. Architects can talk you through the advantages and disadvantages of any particular proposed design and even offer you their own design based on how you wish to best utilise your space.

Savings in the Long-Term

Construction work is perhaps the most costly investment that you can make with your finances, therefore it’s recommended that you consult with an architect who can guide you through the entire process of building step by step and help to turn the concrete addition to your home into a concrete addition to your assets and house value.

Whilst the initial outlay on the services of an architect will no doubt set you back more money that consulting with your local builder would, what you need to remember is that an architect offers a range of services that ensures that a first class job is carried out over all areas of your property.

Architects can save you time by negotiating the red tape of local authority building regulations and save you money by offering your proposed construction work out a group of trusted contract builders.

Architects tend to think about the long term benefit of any expansion to your property. This includes ensuring that your property will remain structurally secure in the long term following expansive building work; utilising their extensive design skills to ensure that you make the most of your available space; making sure that any addition to your home aesthetically matches the rest of your home and maintaining a professional working relationship with you throughout the duration of the project – taking care of every aspect of the project from its inception through to its completion.

Taking Care of Everything

This is an often overlooked quality of a good professional architect. Essentially, an architect should be the manager of your building project who reports to you, the boss of the project. In this role of project manager a good architect will take control of every single aspect of work that relates to your proposed expansion – whether it be offering advice on design plans, external colour schemes, brick choice, landscape design or even just asking you for your signature. The role of a good architect is to essentially make sure that your project offers you a large scope for design input and continued consultation whilst minimising the unnecessary stress of other more formal and administrative aspects of the work that can be taken off your hands.

Barker Microfarads Long-Life Tubular Axial Lead Capacitors are Test-rated to 2,000 Hours

NORTHVALE, New Jersey, USA – New Yorker Electronics has announced its release of the Barker Microfarads (BMI) 601D +105°C Tubular Axial Lead Aluminum Capacitors. Although the 601D Series is used in commercial applications, it is the 601D capacitor series is the commercial equivalent to the military series M39018/03.

As a military equivalent, these aluminum capacitors from BMI feature a wide temperature range of -55°C to +105°C and are Life Validation Test rated to 2,000 hours at +105°C. In addition to its low ESR, the BMI 601D Capacitor Series is available from New Yorker Electronics in voltages ranging from 6.3 to 300VDC working with DC surges from 8 to 350 volts. The standard capacitance tolerance is -10%/+50% and it also boasts a capacitance range of between 12µF and 33,000µF.

There are four types of sleeves available in this series. The polyester sleeve is standard on this device; also available is a P.V.C. sleeve. Both of these sleeves are also available with an epoxy end seal. These seals are available for devices that are exposed to halogenated cleaning solvents, such as in cases of removing fluxes from circuit boards or degreasing tiny metal parts.

Case sizes range from 0.625in Ø x 1.125in L to 1.00in Ø x 3.625in L with 24 options in total. They are manufactured with USA-made aluminum and axial leads with either No. 20 AWG at 0.032in or No. 18 AWG at 0.040in.


Wide Temperature Range
Military Version – Mil-PRF-39018/03
Long Life
Commercial Applications:

In addition, New Yorker Electronics supplies the BMI 604D -55°C to +105°C Tubular Axial Lead; Long Life, Low ESR; Mil-PRF-39018/03 and its 53D -40 to +85°C General Purpose Large Tubular Axial Lead Capacitors.

Barker Microfarads (BMI) is a manufacturer of USA-made high quality, high reliability aluminum electrolytic capacitors. As an authorized dealer of BMI, New Yorker Electronics supplies its broad range of Axial- and Radial-leaded DC capacitors (in both miniature and tubular designs) as well as a full line of AC Motor Starting and AC Motor Run capacitors.